« Time to get rid of my free-roaming bunny’s cage?
Lowering tree timber down with a Friction Drum at ACE »


tree felling with the 3120 XP 6ft at the butt cottonwood

Posted by admin on Feb 5, 2010

cottonwood felling

Duration : 0:2:3


Technorati Tags: ,

9 Comments »

yurifiero:

Thats a big …
Thats a big cottonwood. We have a bunch of them here in Pa but they normally dies b4 they get bigger than 30 inches or so. The biggest tree I cut was a Red oak that was 57 inches on the butt. I had a total of 8 logs on a triaxle load from the oak patch. What kind of saw is that. I used a good ole sthil 460 with a 24inch bar. In my area the hardwoods arent much over 30 inches and most mills wont accept over 36 inches.

February 5th, 2010 | 3:33 pm
JRFFRB:

looks like your …
looks like your chain is a little bit dull. that saw was bouncing off of the limiter a little to much.

February 5th, 2010 | 3:33 pm
stihlman440mag:

I like what …
I like what rolandheming said ( sharpen your saw) do you mean chain, Cotton wood is a hard wood to cut some times. So it can go eather way, dull chain or not rotton .. Keep cutting safe ok guys nice vid

February 5th, 2010 | 3:33 pm
norton666rob:

we are also from …
we are also from washington hahahahha

February 5th, 2010 | 3:33 pm
norton666rob:

my dad has that saw
my dad has that saw

February 5th, 2010 | 3:33 pm
ryryt12:

look at the size of …
look at the size of the bar

February 5th, 2010 | 3:33 pm
rolandheming:

and thats about 5 …
and thats about 5 ft! never mind..

February 5th, 2010 | 3:33 pm
rolandheming:

you need to sharpen …
you need to sharpen your saw!

February 5th, 2010 | 3:33 pm
goatmen:

Beauty drop! Take …
Beauty drop! Take care and be safe..WT

February 5th, 2010 | 3:33 pm